insidepage_img_1.jpg

Safety Inspections, Parts, and Tune-ups

Tune-Ups - Overview

Annual Preventive Maintenance or tune-ups on your heating, cooling, electrical, and plumbing systems can make a big difference in the life of your equipment. From your water heater to your electrical panel to your furnace or air conditioner, Annual Preventive Maintenance can help avoid or mitigate the chances of equipment failure.

Annual Preventive Maintenance is designed around a planned course of action. Yearly inspections of your equipment help to restore the reliability that your peace of mind deserves. Restoring reliability within your electrical, plumbing, heating, or cooling systems is done by inspecting and replacing, if necessary, worn components before they actually fail. Being proactive in the care and maintenance of your equipment can save you money down the road, especially if your furnace, for example, were to fail in the late hours of a January night. Annual Preventive Maintenance of your equipment is one of the most important things you can do for your home and peace of mind.

Tune-Ups – Air Conditioning

Annual Preventive Maintenance, or a tune-up, on your air conditioner, is one of the most important things you can do to not only prolong the life of your air conditioner but to maintain the efficiency of the unit itself. By trying to keep the efficiency at the SEER rating it was when it was new will help keep your energy bills consistent over time. Regular maintenance on your air conditioner will also keep the internal parts clean, operational, and can help maintain the life of the equipment by replacing worn or failing parts. To schedule an Annual Preventive Maintenance for your air conditioner, please call us at 608.205.4410 to set up a call.

Our 21 point inspection includes:

  • CHECK THERMOSTAT FOR PROPER OPERATION
  • OBSERVE INITIAL A/C SEQUENCE
  • CHECK AIR FILTER & CHANGE IF NEEDED
  • CHECK INDOOR BLOWER WHEEL
  • CHECK MOTOR OPERATION, OIL IF NECESSARY
  • INSPECT DUCTWORK FOR AIR LEAKS
  • CHECK & CLEAN CONDENSATE HOSE AND FITTING
  • VISUAL CHECK OF ELECTRICAL PANEL
  • CHECK A/C CIRCUIT BREAKER FOR PROPER SIZE
  • OUTSIDE, CHECK WIRING FOR DAMAGE AND TIGHTEN ELECTRICAL CONNECTIONS
  • CHECK COMPRESSOR AMPS
  • CHECK FREON LEVEL
  • CHECK ELECTRICAL CONTACTS AND CAPACITORS
  • CHECK OUTSIDE MOTOR OPERATION, OIL IF NECESSARY
  • CHECK OUTSIDE FAN BLADE FOR CRACKS AND ROTATION
  • CHECK COIL FOR DIRT AND DAMAGE
  • CHECK TEMPERATURE DROP ACROSS THE INDOOR COIL
  • CHECK HIGH/LOW RETURNS
  • VISUAL CHECK OF WATER HEATER
  • TEST WATER FOR HARDNESS, CHECK FOR SALT IN BRINE TANK
  • CHECK & TEST A/C PER MANUFACTURER’S SPECIFICATIONS

Tune-Ups – Heating

Annual Preventive Maintenance, or a tune-up, on your furnace, is one of the most important things you can do to prolong its life. An annual regularly scheduled tune-up can help to prevent emergency heating repairs. During our 23-point Annual Preventative Maintenance visit, our technicians will thoroughly inspect, troubleshoot, and tune up your heating system to ensure it is at peak performance as you begin to use it more in the fall and winter months. Our dependable technicians have been keeping Dane County residents and businesses warm for more than 40 years. This 23-point system check will help to ensure a longer life of your system, as well as help, save money on your energy bills. If you would like to schedule an Annual Preventive Maintenance on your furnace, please call us at 608.205.4410.

Our 23-point inspection includes:

  • CHECK THERMOSTAT FOR PROPER OPERATION
  • OBSERVE INITIAL FURNACE SEQUENCE
  • CHECK AIR FILTER & CHANGE IF NEEDED
  • CHECK BLOWER FOR PROPER OPERATION
  • CHECK TO SEE IF MOTORS NEED TO BE OILED
  • INSPECT DUCTWORK FOR AIR LEAKS
  • CHECK VENTING (INDOOR AND OUTDOOR) FOR SAFE OPERATION
  • CHECK & CLEAN CONDENSATE TRAP IF NEEDED
  • CHECK & CLEAN CONDENSATE HOSE
  • CHECK INDUCER FOR NOISE AND LEAKS
  • CHECK IGNITION SYSTEM FOR PROPER OPERATION AND SAFETY
  • CLEAN PILOT ASSY. /OHM GLO-BAR FOR DEFECTS
  • CHECK/TIGHTEN ELECTRICAL CONNECTIONS
  • CHECK GAS PRESSURE
  • CHECK FOR GAS LEAKS-SMELL TEST
  • CHECK TEMPERATURE RISE
  • CHECK BLOWER TIMING
  • TEST HIGH LIMIT CUT OUT FOR SAFETY & PROPER OPERATION
  • CHECK AMPS ON MOTORS
  • VISUAL CHECK OF WATER HEATER
  • TEST WATER FOR HARDNESS, CHECK FOR SALT IN BRINE TANK
  • VISUAL CHECK OF ELECTRICAL PANEL
  • CHECK & TEST FURNACE PER MANUFACTURER’S SPECIFICATIONS

Tune-Ups – Plumbing

Annual Preventive Maintenance, or a tune-up, on your plumbing system, is one of the most important things you can do to prolong its life. Believe it or not, your plumbing system’s integrity is made up of many parts then need to be maintained. An inspection of your plumbing is not only beneficial to the system itself, but it also benefits the many appliances that you have connected to your plumbing system. All Comfort Services has been taking care of commercial and residential plumbing systems in Dane County and the Madison area for more than a decade. If you would like to schedule an Annual Preventive Maintenance on your plumbing system, please call us at 608.205.4410.

Our plumbing inspection includes:

  • CHECK FLUSH FOR ALL TOILETS, CHECK SEATS STATIONED CORRECTLY
  • CHECK ALL EMERGENCY SHUT OFF VALVES
  • CHECK FOR ALL SINK LEAKS, CHECK AERATORS, HANDLES, SUPPLIES AND OPERATION
  • CHECK TUBS AND SHOWER HEADS, CAULKING, AND SHUT OFF OPERATION
  • CHECK ALL TUBS FOR DRAIN FLOW, CHECK STRAINERS
  • CHECK WASHING MACHINE HOT AND COLD, CHECK HOSE STRAINERS ARE CLEAN
  • CHECK DRYER FOR ELECTRICAL SUPPLY, VENTING, AND CLEAN VENT IF NECESSARY
  • CHECK HOT WATER HEATER VALVES, RELIEF VALVE, BURNER ASSEMBLY, ELECTRICAL & GAS SUPPLY
  • CHECK CO2 LEVELS AROUND WATER HEATER
  • CHECK SUMP PUMP FOR OPERATION, DISCHARGE, SECURENESS, AND ANCHORING
  • CLEAN HOSE FAUCETS AND SHUT OFF OPERATION
  • CHECK GENERAL WATER FLOW, AND MAKE SURE SHUT OFF VALVES ARE TAGGED
  • CHECK FOOD WASTE DISPOSAL AND DRAINAGE FLOW
  • CHECK DISHWASHER HOSE LOOP
  • CHECK DISHWASHER SUPPLY
  • CHECK DISHWASHER DRAIN
  • CHECK ICE MAKER VALVE/LINE
  • CHECK FOR WET BAR, SINK, FAUCET, DRAIN
  • CHECK FOR FIREPLACE SERVICE LINE
  • CHECK SANITARY SYSTEM FOR LEAKS/CORROSION

Tune-Ups – Electrical

Annual Preventive Maintenance, or a tune-up, on your electrical system, is one of the most important things you can do to prolong its life. Our electricians are always up to date with the latest amendments and revisions to our local codes. Having All Comfort Services perform an inspection of your electrical system can not only bring your current system up to date but maintain the safety and integrity of the system. If you don’t have the technical background to check your electrical system and its wiring, call All Comfort to schedule an Annual Preventive Maintenance on your electrical system, please call us at 608.205.4410.

Our electrical inspection includes:

  • VISUAL INSPECTION OF ELECTRICAL PANEL
  • TORK LUGS AND ELECTRICAL CONNECTIONS
  • CHECK ALL BREAKERS FOR OPERATION
  • CHECK FOR “HOT” BREAKERS
  • VOLTAGE CHECK
  • AMPERAGE CHECK
  • CHECK FOR SURGE PROTECTION
  • CHECK FOR EXTENSION CORDS
  • RECEPTACLE PLUG CHECK
  • CHECK KITCHEN, BATHROOM & OUTSIDE FOR GFCI PROTECTION
  • CHECK SWITCHES
  • CHECK EXHAUST FAN FOR OPERATION
  • CHECK CFM OF EXHAUST FAN
  • CLEAN EXHAUST FAN
  • CHECK OPERATION OF CEILING FANS
  • CHECK FOR SMOKE AND CARBON DETECTORS
  • TEST SMOKE AND CARBON DETECTORS (OFFER NEW BATTERIES)
  • TEST DOOR BELL